0317-2221773

保護開關系列

DZ15D-FY型水泵電機智能保護開關

作者: admin來源: 本站時間:2018-06-10

一、産品簡介:
DZ15D-FY型水泵電機智能保護開關是我公司根據水泵和電機市場需求,與多家大型水泵和電機生産廠家長期合作研發的新型專利産品,該産品對水泵和電機能起到安全保護作用,公司的産品以品質優良,性能穩定而暢銷國内外。
本公司産品采用美國摩托羅拉飛思卡爾微電腦芯片,配備新型電子元件,從而使該系列産品具有壽命長,靈敏度高等特點,有效保護水泵電機因各種原因造成的燒毀。
product description:
DZ15D - FY water pump motor intelligent protection switch is what we according to market demand for the pump and motor, with a number of large water pump and motor manufacturers long-term cooperation research and development of new patented product, It can ensure the safety and protection of the pump and motor, the products are best-selling home and abroad with excellent quality and stable performance.
We adopts the MOTOROLA Freescale microcomputer chip, equipped with the new electronic components, to make the series product has long life, high sensitivity characteristics, effectively protect the pump motor due to damage because of various reasons.

二、應用領域:
該産品主要适用于工廠、農業養殖、灌溉、建築工地、礦山等各個領域中的水泵電機保護。
Application field:
This product is mainly applicable to the protection for water pump motor in factories, agricultural cultivation, irrigation, construction site, mine and so on.
 
三、技術參數及指标:
1、功能介紹
适用于水泵電機保護,具有防電流沖擊,過流,缺相,三相不衡,堵轉,欠壓告警保護功能:(*幹轉保護,漏電保護,一鍵式快速整定,故障查詢)
2、技術參數
型号:DZ15D-FY
額定功率:0.75-1.5kw  1.5-3kw  3-7.5kw  7.5-15kw  15-22kw
防電流沖擊時間:20秒,反時限。
過流動作時間:5秒-3分鐘,反時限動作
缺相動作時間:<3秒
不平衡保護範圍:三相電流不平衡≥50%
防護等級:IP65
注:部分功能可定制
Technical data and indicators:
1. Function introduction
Suitable for pump motor protection, for avoiding current shock, over current, lack of phase, three-phase equilibrium, locked-rotor, under-voltage alarm protection function: (dry turn protection, leakage protection,1 click quick setting,fault query)
2. Technical data
  Model: DZ15D-FY.
Rated power: 0.75-1.5kw 1.5-3kw 3-7.5kw 7.5-15kw 15-22kw.
Anti - current impact time: 20 seconds, inverse time.
Flow time: 5 seconds -3 minutes, inverse time action.
Lack of phase action time: < 3 seconds.
Unbalanced protection range: three-phase current imbalance is greater than 50%.
Protection grade: IP65.
Note: some functions can be customized.
 
四、使用及安裝方法:
安裝接線圖
輸入   輸出    電源-380V  水泵或電機
打開接線端子正确接線,通電後,按設定保存鍵查看保護電流是否匹配,不匹配按以下步驟設定:
 

 
保護電流設定:
(1)按“設定保存”鍵,電流顯示閃動,進入過載設定狀态
(2)按“+-”鍵,調整電流值,一般為電機正常工作電流的1.2倍。(一般電機電流1KW 按2A電流計算,潛水泵電流偏大,如7.5KW潛水泵額定電流18.6A,按1.2倍設定,按+鍵把電流調到23A,再按設定保存鍵保存。)如電壓偏低,可按1.4倍活1.5倍整定,7.5KW潛水泵設定電流26A即可。
(3)調整完成後再按設定保存鍵,電流值停止閃動,電流值自動保存。(不按設定保存鍵30秒後自動保存。)
 空載(幹轉)設定
同時按住“設定/保存”鍵和“實驗按鍵”5秒後進入空載設定狀态,然後按“+”“-”鍵調整空載保護值,調整完成後,再同時按住“設定/保存”按鍵和“實驗按鍵”5秒後退出空載設定狀态。空載電流設定值一般為水泵額定電流的0.7-0.8倍,(例如:7.5kw 水泵額定電流20A,空載設定值可設置為14-16A左右)如不用空載保護,可将空載設定值設置為0.
實驗:合閘後,按“實驗按鍵”,自動跳閘。每月定期實驗一次,确定動作機構是否正常。
投入運行後,實時顯示電機的工作電壓和電流。
有故障産生時,自動跳閘,并進行聲光告警。當出現故障時應先查明故障原因,故障排除後再按任意鍵複位,報警取消,重新合閘。(先複位,再合閘,否則合閘失敗。)
在聲光報警時:
如顯示AAA  缺A相
如顯示BBB  缺B相
如顯示CCC  缺C相
如顯示HHH  過流或堵轉
 
Use and installation methods:
Pic for Installation
Input (輸入) output(輸出)  power(電源)-380V   water pump or motor(水泵和電機).
When the wiring terminal is turned on correctly, after the power is energized, press the set save key to see whether the protection current is matched. The mismatch is set as follows:
Protection current setting:
(1) press the "set save" button, and the current displays the flashing, entering the overload setting state.
(2) adjust the current value according to the "+-" key, which is generally 1.2 times the normal working current of the motor.
(general motor current 1 KW as 2 A current calculation, submersible pump current is big, such as 7.5 KW submersible pump rated current of 18.6 A, 1.2 times according to the set, press the + key to current transferred to 23 A, then set the save button to save.)
If the voltage is low, it can be 1.5 times or1.4 times, and the 7.5kw submersible pump sets the current 26A.
(3) after the adjustment is completed, press the set save button, the current data stops flashing, and the current data is saved automatically.( saved automatically after 30 seconds if do not press saving button.)
Zero load (dry rotation) setting.
While pressing the "set/save" button and "test" button into the zero load after 5 seconds, and then press the "+" "-" button to adjust zero load protection data, after adjustment, press the "set/save" button and "experiment" button at the same time for 5 seconds ,then the exit zero load setting state.
Zero-load current data for water pump commonly  be 0.7- 0.8 times the rated current, (for example: 7.5 kw water pump rated current 20A, no-load value can be set to 14-16 A) if do not need zero-load protection, it can be set as 0.
Test button: after turn off, press "test button", automatic tripping.Periodically test once a month to determine whether the actuator is normal.
After the operation, the working voltage and current of the motor are displayed in real time.
When there is a fault, the automatic tripping and alarm.In case of failure, the cause of the fault should be found out first. After the fault is removed, press any button to reset, the alarm will be failed, and the switch will be off again.
(reset first, then switch on, otherwise the switch on failure.)
On sound and light alarm:
show AAA  lacks A phase.
Show BBB   lacks B phase.
Show CCC   lacks C phase.
Show HHH   over current or locked rotor.
 
 
五、産品特點:
六、本産品具有電流、電壓數字顯示功能,能很直觀的觀測到水泵電機的正常工作狀态、電流大小,根據現場工作情況任意調整、有故障産生時,自動跳閘,并聲光告警。采用了新型高靈敏斷路器,接觸點選用銀鎢合金制作,所有機構鐵件都經過淬火處理,分合閘不變形,經久耐用。接線柱導線所有銅件均選用紫銅制作。
 
五. product features:
This product has the function of current and voltage digital display, can be very intuitive observation to the normal working state, and the size of the current pump motor, according to the field work situation adjust, malfunction, automatic trip, and sound and light alarm.
The new type of high sensitive circuit breaker is adopted, the contact point is made of silver tungsten alloy, all the iron parts of the body are quench, and the parting is not deformed and durable.
All copper parts of the terminal wire are made of copper.
 
六、注意事項:
1、由專業技術人員安裝本産品。
2、确認電源斷開後再進行維修或安裝。
3、将本産品安裝在幹燥、通風、無腐蝕性氣體環境中,且兒童觸及不到的地方。
4、請确保本産品與水泵電機功率相符。
5、電源側與負載側接線螺絲必須擰緊
6、使用前請調整過載電流與水泵電流相符
六. Precautions:
1. Install the product by professional technicians.
2. Confirm that the power supply is disconnected and then repair or install.                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  
3. Install the product in a dry, ventilated, non-corrosive gas environment, and where children can't reach.
4. Please ensure that this product conforms to the power of the pump motor.
5. The power side and load side wiring screw must be tightened.
6. Please adjust the overload current to match the water pump current .
 
 
注:本公司産品已申報多項國家專利,系國内獨家生産。仿造後果自負。
Note: our products have been declared a number of national patents, domestic exclusive production.Imitation has its own consequences.
 
 
 
 
1. 電流顯示
正常狀态時顯示當前電流。當進入設定狀态時,顯示過載電流設定值。當出現故障時顯示相應代碼,先排除故障,再按任意鍵複位,将開關手柄合上就能正常工作了。
2. 過載設定
根據水泵額定電流的1.2倍設定過載保護值。将380V電源接到輸入端,輸出接水泵。接通電源按“+”“-”鍵調整過載電流值,調整完成後,再按“設定保存”鍵保存設定值,然後将電源手柄合上,就能正常工作了。按實驗按鍵,能檢測開關是否起到保護作用。
3. 空載(幹轉)設定
同時按住“設定/保存”鍵和“實驗按鍵”5秒後進入空載設定狀态,然後按“+”“-”鍵調整空載保護值,調整完成後,再同時按住“設定/保存”按鍵和“實驗按鍵”5秒後退出空載設定狀态。空載電流設定值一般為水泵額定電流的0.7-0.8倍,(例如:水泵額定電流20A,空載設定值可設置為14-16A左右)。如不用空載保護,可将空載設定值設置為0.
 
1. Current display
The current is displayed in normal state.
When entering the set state, display the overload current setting data.
When there is a failure, the corresponding code is displayed. First, troubleshoot, then press any key to reset, and the switch handle can work properly.
2. Overload setting
Set overload protection data according to the pump rated current 1.2 times.
Connect the 380V power supply to the input terminal and output the pump.
Adjust the overload current value according to the "+" "-" key, then press the" set save "button to save the set value, and then close the power handle to work properly.
Press the button to detect whether the switch is protective.
3. zero-load (dry rotation) setting.
While holding down the "set/save" button and "experiment" button into the empty set state after 5 seconds, and then press the "+" "-" key to adjust light protection value, after the completion of the adjustment, and at the same time hold down the "set/save" button and "Test" button for 5 seconds after the exit light setting state.
The zero-load current setting data is generally 0.7-0.8 times the rated current of the pump (for example, the rated current of the pump is 20A, and the zero-load set data can be set to about 14-16A).
If do not need zero-load protection , the zero-load set data can be set to 0
 
 
 
河北省任丘市東方開關電器有限公司
Hebei Province Renqiu City Dongfang Switch electrical appliance Co.,Ltd
 
地址:
ADD:economic and technological development zone Renqiu city Hebei province
 
電話:
Tel:0.317-2221773  2261683 13930768540
 
網址:
Website:zhongte23082.cn    QQ:1191134957
 
專利号:
Patent No.:ZL201020154800.6
 
水泵(電機)智能保護開關  water pump(motor) intelligent protection switch

本站關鍵詞:東方電器,任丘東方開關廠,東方電器開關
Copyright © 2014-2017 任丘市東方開關電器有限公司 zhongte23082.cn 版權所有 電話:0317-2221773 地址:任丘市經濟技術開發區燕山北道林業區路口對面